نمايندگي بيرينگ ( بلبرينگ ) هاي برند RKB

شما در اين وبلاگ اطلاعات تخصصي در زمينه بيرينگ ( بلبرينگ ) بدست خواهيد آورد. لطف

تحليل و بررسي ريشه اي علت خرابي

۱۸ بازديد

 RKBمي تواند تحليل و بررسي ريشه ايِ علت خرابي بيرينگ   (RCFA) را انجام دهد كه از طريق آن مي توان :

.مكانيزم هايي كه باعث خرابي بيرينگ در يك كاربرد خاص شده اند را شناسايي كرد .
.خلوص بسيار بالاي فولاد بيرينگ را براي فرايند واجد شرايط بودن تأمين كنندگان فولاد ارزيابي كرد .
.ساختار ميكروسكوپي و سختيِ فولاد را براي صحت و درستي فرايند هاي عمليات حرارتي تجزيه و تحليل كرد .
.جوانه زني شكست و افزايش استفاده از جديد ترين تكنيك هاي ميكروسكوپي نوري را بررسي كرد .

Angular contact ball bearings

۶۴ بازديد

لطفا جهت ارتباط با دفتر مركزي شركت باهر كيميا (تنها نماينده رسمي بيرينگ هاي RKB در ايران) روي اين لينك كليك نماييد!

RKB ball bearings

The ball bearings (BBs) manufactured by RKB come in many designs, dimensions and series. They are conceived to withstand combined loads and high speeds, covering most requirements in a number of standard and special industrial applications. All RKB BBs are made from high quality materials and special heat treatments
for superior performance.
Available in single and double row con guration, in open or sealed version, they are low-maintenance, which makes them an irreplaceable cost-effective solution in many cases. For large size BBs, RKB can also apply Bainite Hardening Treatment (HB) and High Temperature Dimensional Stabilization (S) on rings and balls. The bearing dimensional and running accuracy conforms to ISO/ABMA/
GOST speci cations.

Angular contact ball bearings

The angular contact ball bearings (ACBBs) produced by RKB are used in a wide array of machines where combined loads, high speeds and runout accuracy are required. Available in single or double row con guration, they can be manufactured with different types of cage (machined brass, pressed steel or polyamide) and dimensional precisions.
Single row ACBBs can be directly paired by RKB in face-to-face (DF) or back- to-back (DB) con guration, depending on load conditions, presence of tilting moments and misalignment magnitude in the application.
 

M type Angular ball bearings

One-piece inner and outer ring One-piece machined brass cage guided on balls (M) Available with machined brass cage guided on inner ring (MB)
Single non-universal bearing execution Suitable for very high operating speeds Available with 25°, 30° or 40° contact angle

QJ type Angular ball bearings

One-piece outer ring Two-piece inner ring circumferentially split One-piece machined brass cage guided on outer ring (MA)
Supports only axial loads
Two locating slots (N2)
Available also with one-piece inner ring and two-piece outer ring (Q)

DB type Angular ball bearings

Back-to-back arrangement (DB) of two ACBBs One-piece machined brass cage guided on balls (M) Preset or adjusted BEP on customers request Available with machined brass cage guided on inner ring (MB)
Available with inner and/or outer spacers featuring lubrication grooves and/or lubrication holes
Stiffer arrangement to withstand tilting moments

DF type Angular ball bearings

Face-to-face arrangement (DF) of two ACBBs One-piece machined brass cage guided on balls (M)
Preset or adjusted BEP on customers request Available with machined brass cage guided on inner ring (MB)
Available with inner and/or outer spacers featuring lubrication grooves and/or lubrication holes

DB+ZZ type Angular ball bearings

Double row ACBB back-to-back arrangement (DB) Non-separable shielded design (ZZ)
Moulded glass  ber reinforced polyamide snap-in cage guided on balls (TN)
Available with lubrication holes in the inner ring
Shielded type to keep the grease inside the
bearing without compromising the limiting speed Supports high combined loads

DFM type Angular ball bearings

Double row ACBB face-to-face arrangement (DF) Non-separable open design
One-piece machined brass cage guided on inner ring (MB)
Lubrication grooves and holes in outer rings Supports high combined loads

 

SPECIAL DESIGNS Spherical roller bearings

۸ بازديد

لطفا جهت ارتباط با دفتر مركزي شركت باهر كيميا (تنها نماينده رسمي بيرينگ هاي RKB در ايران) روي اين لينك كليك نماييد!

RKB spherical roller bearings

The spherical roller bearings (SRBs) manufactured by RKB are engineered to withstand high radial forces and moderate axial forces acting in both directions. RKB SRBs can dynamically accommodate misalignments due to shaft bending. They are produced with cylindrical or tapered bore, in open or sealed execution. Depending on application requirements, RKB Bainite Hardening Treatment (HB) and High Temperature Dimensional Stabilization (S) can be applied on bearing rings and rollers. Moreover, as for dimensions, RKB spherical roller bearings are manufactured according to ISO/ABMA/GOST speci cations. As a consequence, they are fully interchangeable with all the bearings that meet the relevant international
standards.
 
 

Tailor made solutions spherical roller bearings

Besides the main spherical roller bearing designs, RKB has developed new solutions according to speci c application requirements.
The special designs include SEALED SRBs, for smooth operation in contaminated environments, ROVSX type, expressly designed for vibratory equipment, WOR execution, suitable for gear output shaft of truck concrete mixers, and SPLIT bearings to make maintenance operations easier at hard-to-reach positions.
If duly applied, these special designs are cost effective for the customer, since they allow increased bearing life expectancy and reduced machine downtime

MAIN DESIGNS Spherical roller bearings

۸ بازديد

لطفا جهت ارتباط با دفتر مركزي شركت باهر كيميا (تنها نماينده رسمي بيرينگ هاي RKB در ايران) روي اين لينك كليك نماييد!

 

RKB spherical roller bearings

The spherical roller bearings (SRBs) manufactured by RKB are engineered to withstand high radial forces and moderate axial forces acting in both directions. RKB SRBs can dynamically accommodate misalignments due to shaft bending. They are produced with cylindrical or tapered bore, in open or sealed execution. Depending on application requirements, RKB Bainite Hardening Treatment (HB) and High Temperature Dimensional Stabilization (S) can be applied on bearing rings and rollers. Moreover, as for dimensions, RKB spherical roller bearings are manufactured according to ISO/ABMA/GOST speci cations. As a consequence, they are fully interchangeable with all the bearings that meet the relevant international standards.

 

A complete range spherical roller bearings

The range of RKB spherical roller bearings covers most requirements of standard and special industrial applications, in severe and critical working conditions.
RKB offers a wide portfolio of open and sealed SRBs in all diameter and width series. While the narrow low-section bearings (e.g. 238 series) feature high speed capabilities as well as low weight and minimum space dimensions, the wide high-section bearings (e.g. 233 series) have higher load carrying capacities.
All RKB SRBs put together experience in design with proven performance in all major industries.

SINGLE ROW- Cylindrical roller bearings

۱۰ بازديد
لطفا جهت ارتباط با دفتر مركزي شركت باهر كيميا (تنها نماينده رسمي بيرينگ هاي RKB در ايران) روي اين لينك كليك نماييد!
 

RKB cylindrical roller bearings

The cylindrical roller bearings (CRBs) manufactured by RKB are produced in many designs, dimensions and series, to withstand heavy radial loads and medium speeds, covering most of the requirements in a variety of standard and special industrial applications. All CRBs manufactured by RKB offers the highest load rating capacities, improved internal geometry, high quality materials and special heat treatments for superior performance. RKB CRBs are available with cylindrical or tapered bore in single, double or multi row con guration. Depending on application requirements, RKB Bainite Hardening Treatment (HB) and High Temperature Dimensional Stabilization (S) can be applied on bearing rings and rollers. The bearing dimensional and running accuracy conforms to ISO/ABMA/GOST speci cations.
 
 

Single row cylindrical roller bearings

RKB offers a wide range of single row cylindrical roller bearing designs in normal or reinforced execution with increased performance in critical applications.
Roller and raceway pro les are designed to attain optimized stress distribution while minimizing the edge effect, especially under critical conditions.
The portfolio of RKB single row CRBs is  nally enhanced by the high-capacity full complement bearings (cageless), which reach higher load carrying capacities within the same boundary dimensions

MULTI ROW- Cylindrical roller bearings

۱۰ بازديد

لطفا جهت ارتباط با دفتر مركزي شركت باهر كيميا (تنها نماينده رسمي بيرينگ هاي RKB در ايران) روي اين لينك كليك نماييد!

 

RKB cylindrical roller bearings

The cylindrical roller bearings (CRBs) manufactured by RKB are produced in many designs, dimensions and series, to withstand heavy radial loads and medium speeds, covering most of the requirements in a variety of standard and special industrial applications. All CRBs manufactured by RKB offers the highest load rating capacities, improved internal geometry, high quality materials and special heat treatments for superior performance. RKB CRBs are available with cylindrical or tapered bore in single, double or multi row con guration. Depending on application requirements, RKB Bainite Hardening Treatment (HB) and High Temperature Dimensional Stabilization (S) can be applied on bearing rings and rollers. The bearing dimensional and running accuracy conforms to ISO/ABMA/GOST speci cations.

 

Multi row cylindrical roller bearings

Multi row cylindrical roller bearings, also known as MULTIROLL, are made up of two parts: inner ring (L) and outer assembly (R), which includes outer rings, cage and four rows of rollers.
They are mainly used in rolling mill stands, where they are subjected to very high radial loads and impacts combined with medium-low speeds.
RKB MULTIROLL bearings are manufactured in different executions, to suit a wide range of applications and environments, above all in the harsh conditions of the steel and aluminum industry

DOUBLE ROW - Cylindrical roller bearings

۶ بازديد

لطفا جهت ارتباط با دفتر مركزي شركت باهر كيميا (تنها نماينده رسمي بيرينگ هاي RKB در ايران) روي اين لينك كليك نماييد!

 

RKB cylindrical roller bearings

The cylindrical roller bearings (CRBs) manufactured by RKB are produced in many designs, dimensions and series, to withstand heavy radial loads and medium speeds, covering most of the requirements in a variety of standard and special industrial applications. All CRBs manufactured by RKB offers the highest load rating capacities, improved internal geometry, high quality materials and special heat treatments for superior performance. RKB CRBs are available with cylindrical or tapered bore in single, double or multi row con guration. Depending on application requirements, RKB Bainite Hardening Treatment (HB) and High Temperature Dimensional Stabilization (S) can be applied on bearing rings and rollers. The bearing dimensional and running accuracy conforms to ISO/ ABMA/GOST speci cations.

Double row cylindrical roller bearings

With a wide range of executions of double row cylindrical roller bearings (DRCRBs), RKB is able to ful ll any requirement in demanding applications such as large size gearboxes, machine tools, grinding mills and crushers.
To ensure superior performance, RKB double row cylindrical roller bearings are manufactured from high quality special steels, heat treated in optimized automatic lines.
With improved internal geometry and pro le, DRCRBs can withstand high radial loads within a narrow cross section.

 

SINGLE ROW - Tapered roller bearings

۴ بازديد

لطفا جهت ارتباط با دفتر مركزي شركت باهر كيميا (تنها نماينده رسمي بيرينگ هاي RKB در ايران) روي اين لينك كليك نماييد!

RKB tapered roller bearings

The tapered roller bearings (TRBs) manufactured by RKB are engineered to withstand combined radial and thrust loads. Available in a rich portfolio of designs and sizes, in standardized and non-standardized dimensional series, RKB tapered roller bearings can be in metric or inch measurements and represent the state of the art. Manufactured from high hardness materials, featuring unparalleled fatigue strength and resistance to wear, RKB TRBs provide excellent performance even under severe operating conditions. RKBs single row, matched pair, double and four-row tapered roller bearings are optimized to ensure increased load carrying capacities and high stiffness in special applications. RKB Bainite Hardening Treatment (HB) and High Temperature Dimensional Stabilization (S) can be
applied on bearing rings and rollers.
 
 

Single row tapered roller bearings

RKB single row and matched pair tapered roller bearings (SRTRBs) are widely used in all industrial segments, in standard and critical applications.
The tighter dimensional tolerances, obtained through an extremely high precision manufacturing technology, and the optimized inner geometry (E-Type class) make of such bearings a reliable solution to improve the performance of any machine.
Naturally, the matched pairs can be assembled according to the customers special needs (e.g. a given axial internal clearance). The bearing dimensional and running accuracy conforms to ISO/ABMA/GOST speci cations.

Four-row tapered roller bearings

۶ بازديد

لطفا جهت ارتباط با دفتر مركزي شركت باهر كيميا (تنها نماينده رسمي بيرينگ هاي RKB در ايران) روي اين لينك كليك نماييد!

RKB tapered roller bearings

The tapered roller bearings (TRBs) manufactured by RKB are engineered to withstand combined radial and thrust loads. Available in a rich portfolio of designs and sizes, in standardized and non-standardized dimensional series, RKB tapered roller bearings can be in metric or inch measurements and represent the state of the art. Manufactured from high hardness materials, featuring unparalleled fatigue strength and resistance to wear, RKB TRBs provide excellent performance even under severe operating conditions. RKBs single row, matched pair, double and four-row tapered roller bearings are optimized to ensure increased load carrying capacities and high stiffness in special applications. RKB Bainite Hardening Treatment (HB) and High Temperature Dimensional Stabilization (S) can be
applied on bearing rings and rollers.
 
 

Four-row tapered roller bearings

RKB four-row tapered roller bearings (FRTRB) are produced mainly in TQO and TQI con guration, in open and sealed version.
Supplied with the required axial internal clearance (BEP), they are mainly employed on work rolls of rolling mill applications.
The use of high quality raw materials, special heat treatments, and innovative sealing solutions are at the base of their higher operating reliability and longer service life expectancy. The bearing dimensional and running accuracy conforms to ISO/ABMA/GOST speci cations.

DOUBLE ROW - Tapered roller bearings

۱۰ بازديد

لطفا جهت ارتباط با دفتر مركزي شركت باهر كيميا (تنها نماينده رسمي بيرينگ هاي RKB در ايران) روي اين لينك كليك نماييد!

RKB tapered roller bearings

The tapered roller bearings (TRBs) manufactured by RKB are engineered to withstand combined radial and thrust loads. Available in a rich portfolio of designs and sizes, in standardized and non-standardized dimensional series, RKB tapered roller bearings can be in metric or inch measurements and represent the state of the art. Manufactured from high hardness materials, featuring unparalleled fatigue strength and resistance to wear, RKB TRBs provide excellent performance even under severe operating conditions. RKBs single row, matched pair, double and four-row tapered roller bearings are optimized to ensure increased load carrying capacities and high stiffness in special applications. RKB Bainite Hardening Treatment (HB) and High Temperature Dimensional Stabilization (S) can be
applied on bearing rings and rollers.
 
 

Double row tapered roller bearings

  • RKB double row tapered roller bearings (DRTRBs) are produced in several con gurations (TDO, TDOS, TDI, TDIS) to support combined forces and locate the shaft in both directions.

  • Manufactured with a given axial clearance (BEP), DRTRBs can fully exploit their potential in a variety of industries and applications. In order to manufacture products with the highest possible resistance to fatigue and wear, RKB makes use of different bearing steel grades and special heat treatments. The bearing dimensional and running accuracy conforms to ISO/ABMA/GOST speci cations